Drinking water treatment unit
 
Production line for beverage
 
Filling machine
 
Labeling machine
 
Packing machine
 
Injection molding machine
   
Blow molding machine
   
Plastic mold and product
   
Ozone generator
   
RO system for sea water
   
Direct drinking water system
   
Various spares
   
 
 
Ningbo Hautek Industries Co., Ltd. Based on more than 10 years of professional machinery exporting experience, with rich knowledge of beverage project, bottling technology and bottle making machinery, water treatment plants, drinking water treatments, HAUTEK focuses on high and middle level international market, major in beverage production line design and manufacturing, also supply relative assorted equipment. Supported by strong technical team, we offer high quality machine, water treatment plants, drinking water treatments, good service to customers and give prompt response. We have had success in exporting and installation many beverage production lines abroad.
DRINKING WATER TREATMENT UNIT
 
Water treatment unit HW series
Working Conditions:
Raw Water: [Fe]+≤0.5ppm,[Mn]+ ≤0.1ppm
Raw Water TDS: ≤5000ppm
Raw Water Temperature: better 15~40oC
Operation: 24hours/day
 
water treatment plants, drinking water treatments
 

HW series pure water treatment units that we manufacturing consist of pre-treatment part, RO device and back wash treatment part, including dosing system,sand filter, active carbon filter, micro filter, pre-UV sterilizer RO system and post UV device or Ozone device. Widely use in the field of drinking water production, bottling industry, water supplying, ultra pure water for electronic industry, desalination for saline waters and brackish waters, etc.

 
Features:
  • Adopted membranes with high desalination ratio and low pressure running which are from HYDRANAUTICS USA or FILMTEC USA, to reduce the running cost, and prolong the equipment life-span.
  • Adopted high efficiency low noise high pressure pump to reduce the power consumption, to guarantee a stable and quiet running. With low pressure and high pressure protector switches to prevent the damage from water shortage and pipeline block.
  • Conductivity monitor for continuous live monitor to guarantee the high quality permeate water. With flow meter for end-product water and concentrate water to monitor and adjust the output capacity and system permeate recovery ratio
  • Equipped with Mitsubishi PLC for automatic control of auto running from raw water to end-product water and back wash process. With adjustable full automatic backwash time controller, before each time running, the RO membrane surface can be fast timing rinsed, to reduce the pollution, and prolong the membrane life-span.
  • High quality stainless steel for frame, pre-treatment part, UPVC for pipe fittings, and with auto-control solenoid valve.
Model
HW-250
HW-500
HW-1000
HW-1500
HW-2000
HW-3000
Item
Product Water Output Flow
250 liter/hour
500 liter/hour
1000 liter/hour
1500 liter/hour
2000 liter/hour
3000 liter/hour
Rejections
≥95%
Raw Water Input Flow
1000 liter/hour
2000 liter/hour
3000 liter/hour
3500 liter/hour
5000 liter/hour
Controller
PLC(Mitsubishi)Automatic Controller
Voltage
220V 50/60Hz Single Phase,380V 50/60Hz 3Phase,220V 50/60Hz 3 Phase
Total Power Consumption
1.8KW
2.2KW
2.3KW
3.0KW
3.8KW
5.6KW
Dimension(LXWXH)
250X80X140cm
280X80X140cm
Weight
150KG
180KG
220KG
280KG
350KG
500KG