Drinking water treatment unit
 
Production line for beverage
 
Filling machine
 
Labeling machine
 
Packing machine
 
Injection molding machine
   
Blow molding machine
   
Plastic mold and product
   
Ozone generator
   
RO system for sea water
   
Direct drinking water system
   
Various spares
   
 
 
INJECTION MOLDING MACHINE
China Ningbo Hautek Industries Co., Ltd. Based on more than 10 years of professional machinery exporting experience, with rich knowledge of beverage project, bottling technology and bottle making machinery, plastic injection molding machine, plastic injection moluding machine, HAUTEK focuses on high and middle level international market, major in beverage production line design and manufacturing, also supply relative assorted equipment. Supported by strong technical team, we offer high quality machine, plastic injection molding machine, plastic injection moluding machine, good service to customers and give prompt response. We have had success in exporting and installation many beverage production lines abroad.
TW series
 
plastic injection molding machine, plastic injection moluding machine
 
Features:
Hydraulic Part:Use imported control valves and pumps with famous brands. Control with twin-proportional valve in pressure and flow so as to enable the machine reach an optimum state.
Injection part:Double directive column support and twin-cylinder balanced injection. Line arranged hydraulic motor-preplastication device. A fine turning device for aiming at center of nozzle and a close type of single cylinder advanced forward device Screw made of high quality nitrogen alloy steel and barrel with nitrogen treatment. Alarm functions while over-high/over-low temperature taking place in melting barrel.
Mold Clamping part: Adopted an inclined line-five points curve toggle structure. Using mechanic regulation supports as supports of mobile mould panel for protecting pull rod and prolonging its life. Underside protective device of mold close is convenient for mold setting. Equipped with a low-pressure mold protective function with high sensitivity.
Electric Control Part: Use the imported computer special for injection machine. Display with both Chinese and English. Acceleratin response speed of control system and improving the operation accuracy of machine are resulted by separate treatment of CPU. An automatic function of mold regulation is acting.
Specific Setting of Injection Machine
Pre-plasticizing five-star motor: ZHONGYI(Made by Sino-Italy joint venture enterprise.)
Hydraulic pump:VICKERS(U.S.A)
Double layer high-pressure hydraulic pipe:ALFAGOMMA(Italy)
Directive valve:VICKERS(U.S.A)
Proportional valve:BOSCH (Germany)
Seal rings:KDAS(U.S.A)
Singli-pole switch:FUJI(Japan)
Limited switch:OMRON(Japan)
Sensitive switch:OMRON(Japan)
Air switch:FUJI(Japan)
A.C. contactor:TE(France)
Thermo-nozzle:U.K.
Computer:HONGXUN(Taiwan)
Linear transducer:VISHAY(France) or (America) as optional
 
SPECIFICATION FOR PET PREFORM GENERAL PURPOSE
2200PET 3800PET TW-1200 TW-1500 TW-2000 TW-2500 TW-3280 TW-3680 TW-5000 TW-9680
B C A B C A B C A B C A B C A B C A B C A B C A B C D
INJECTION UNIT Shot Volume Cm3 610 1457 140 172 210 172 213 270 340 425 515 787 924 1070 1094 1269 1457 2000 2260 2540 3770 4562 5490 6140
(theoretical)
Shot Weight g 760 1600 130 160 200 150 190 240 306 380 460 520 620 705 750 880 1000 984 1142 1311 1800 2030 2280 3431 4151 5000 5600
Screw Diameter mm 60 75 36 40 43 36 40 45 45 50 55 55 60 64 60 65 70 65 70 75 80 85 90 100 110 120 127
Injection Pressure Mpa 123 136 207 168 145 237 192 151 219 177 146 193 162 142 184 156 135 181 156 136 168 149 133 211 174 146 130
Injection Rate g/s 265 500 88 108 125 100 124 157 125 156 185 192 228 259 262 308 350 320 370 426 430 480 540 680 824 980 1120
Plasticizing Capacity g/s 42 70 14 16 20 18 20 22 26 32 38 38 52 62 45 52 60 70 80 90 88 105 120 135
Screw Speed rp.m 180 180 190 220 180 160 180 150 110
Screw L/D Ratio L/D 22.9 21.6 23.3 21 19.5 23.3 21 18.6 23.3 21 19 22.9 21 19.6 22.7 21 19.5 21.5 20 18.7 21.2 20 18.8 24 21.8 20 18.9
CLAMPING UNIT Clamping Force KN 2200 3600 1200 1500 2000 2500 3280 3680 5000 9680
Open Stroke mm 460 640 360 390 460 540 585 640 730 1200
Space Between Tie Bars(w*h) mm 510*510 710*640 360*390 430*390 510*461 544*580 630*630 710*640 800*710 1095*1055
Mould Thickness mm 200-500 250-700 150-380 150-400 200-500 220-550 220-620 250-700 350-750 500-1200
Ejector Force KN 53 90 39 39 53 70 70 90 150 215
Ejector Stroke mm 130 160 100 100 130 140 150 160 185 320
Hole Diameter mm Ø160H7 Ø160H7 Ø125H7 Ø125H7 Ø160H7 Ø160H7 Ø160H7 Ø160H7 Ø160H7 Ø250H7
Sphere Diamtter of Nozzle mm Sr15 Sr15 Sr15 Sr15 Sr15 Sr15 Sr15 Sr15 Sr15 Sr20
Ejector Quantity 9 13 5 5 9 9 13 13 13 21
Max.Moule-shift Speed m/min 50 50 30 26 50
OTHER Heater Power KW 17.2 25 7.6 7.6 11.5 16.55 22 24.6 58.8
Pump Motor Power KW 18.5 37 11 15 18.5 30 37 45
Max.Pump Pressure Mpa 16 16 16 16 16 16 16 16 16
Machine Dimension (LxWxH) mm 5500*1360
*2050
7000*1700
*2100
3950*1200
*1800
4130*1200
*1810
5010*1360
*2050
6350*1750
*2260
6780*1730
*2115
7650*1780
*2650
11700*2800
*3800
Machine Weight ton 8 15 3.8 4 7 11 14 19 55